How can I integrate products controlled by a 1-way radio transmitter into TaHoma®?

9 26.09.2019

Open the system settings of your TaHoma®.
Select the category "io" (or RTS - depending on the radio protocol of your product) and click on "Add".
Now select the category for the product you want to add. For example, select the circle "Products" and click on "OK".

he next step is the channel selection. After selecting, TaHoma® will show you where the programming button on your station is located in the next step.
Press the programming button on one of your radio transmitters for about 3 seconds. To confirm, the roller shutter motor connected to the transmitter performs a quick up-down movement. Note: Please make sure to press the Prog button on just one transmitter, otherwise you run the risk of changing the transmitter-to-motor configuration.
Now confirm on your TaHoma® interface by clicking "OK". Your TaHoma® Box will then search for new products.
After a few moments, your TaHoma® Box will recognise the product connected to the sender. Click on the "Confirm" button to complete the process.
After the product has been detected, it will be displayed in the product list. Select the new product and click on "rename" to access further options for the product.
In the following window you will be able to test the new product. Click on "identify". The shutter motor confirms the test with short back and forth movements. Enter your chosen name for the product in the input field, e.g. left side of the living. Then select "OK".
You will now have successfully connected your product to TaHoma®. First test whether the hand-held or wall-mounted transmitter also controls the product. If the local transmitter works, repeat the steps with another device and transmitter.

Back to FAQ list View more FAQ in this category