SAFETY, Secure your home by seeing visitors directly from the indoor monitor and deciding whether or not to give them access.
EASY TO USE, Designed for intuitive handling and attractive daily use.
EASY TO INSTALL, Connection of the monitor and the call station with 2 wires only, strike opening time setting and call station compatible with narrow pillars.
PEACE OF MIND, Integrated RTS radio transmiter to control up to 5 wireless Somfy equipments or groups of equipments directly from the monitor : roller shutters, lighting, gates, garage doors...
Width : 175 mm
Height : 22 mm
Depth : 0 mm
Warning
If you wish to control your Somfy RTS motorized gate via radio from the monitor, you must register the radio control before installing the monitor (the monitor must then be linked to the motorized gate through its power supply) or activate the button on the motorized gate, depending on the model.
Refer to the Registration of the motorized gate in the monitor's memory FAQ.
View more
Recommendation
Avoid installing the camera facing a light source. Visitor images be unsatisfactory. We recommend installing the outdoor panel at a height of approximately 1.60 m.
The icon flashes, the bell rings, and when a visitor presses the call button on the outdoor panel on the screen, their photo is displayed.
Note: If the occupant does not answer the call, the monitor saves the visitor's photo before it stops ringing. To accept the call, press the "communication" icon :
The icon stays lit throughout the call. To end the communication, either press it again, open the gate or activate the electric lock.
Note: if no action is taken, the maximum duration of the call is two minutes.
The microphone on the indoor monitor and the loudspeaker on the outdoor panel are activated only after the call has been accepted. During the call, you can:
Note: the banner on the right displays the RTS products that have been paired with the monitor.
Select the equipment by clicking on the touch-screen button to the right of the corresponding icon:
Select the action to be taken (open/close, up/down or on/off) or click on the touch-screen button next to the arrow to return to the RTS product list.
When a visitor rings your video phone in your absence, a picture is taken. The icon on the monitor will then flash to let you know of their presence. .
To view it, click on the icon .
To change the initial settings or add additional settings, press the yellow button on the right side of the monitor:
For grouped control, you can add products similar to those already paired on the same channel (a second roller shutter, for example).
To do so, press the yellow button on the side of the monitor, then select "Register a group of RTS products".
Select the channel on which you'd like to add an RTS device and confirm.
If the device responds correctly, press the touch-screen confirmation key .
If the device does not respond, press the touch-screen non-confirmation key to repeat the previous steps.
If you pressed , the home screen appears, and the group to which the product has been added shows the number of paired products.
You can delete a product or group of products.
Note: if you wish to delete a product from a group, you must delete the group and then again pair the product(s) you want to control with the monitor.