FAQ

• Put the monitor by the gate operator and power it through its power supply (A).
• Press the touch-screen key corresponding to the location of the device to be stored.
• Choose the icon that represents the products to be remembered:
  • Swinging gate
  • Sliding gate
• Open the cover of your motorized equipment to access its electronics.
• Press for two seconds on the Power button of your electronics (if you don't have this button, go directly to the next step). The indicator  lights up on the electronics.
• Place the monitor on the target of the motor's electronics box (B). Important: The left side of the monitor must be placed on the target of the electronic box so that it's well detected by the motor's electronics.
  • Press the touch-screen key corresponding to the arrow  to pair the monitor with the product and proceed to the next step.
  • The  light on the motor blinks on and off (C).
• Press the touch-screen buttons corresponding to the commands  and  to check the paired product's response.
  • If the carrier product responds correctly, press the touch-screen confirmation .
  • If you pressed on , the paired product is displayed on the right side of the home screen.

For more details, please refer to the "Add a 3-button remote control" paragraph in your SOMFY motorization manual.

Yes, the motorisation will be wired-controlled through the dry contact input.